Vacuum Potting & Electronics Potting
You
are here: System Profiles > Model 9450 Single Acting
) |
| Click photo to view a larger version. |
Model 9450 Single Acting Meter, Mix and Dispense System
| Bore (Major Component): | 3.500" diameter |
| Stroke: | 6" |
| Full Stroke Volume (1:1 ratio): | 61 fl. oz/1805.4 cc |
| Overall Length (Baseplate): | 55" |
Designed for production dispensing of two part reactive resin formulations with abrasive fillers which settle out of suspension.
STANDARD FEATURES
- Wide range of bore sizes and ratios to satisfy your production requirements.
- Positive displacement piston metering for consistent, accurate delivery of A and B materials. Ratio is assured by honed cylinder diameters.
- Precision ball valves eliminate problems caused by check valves.
- Low cycle rate for improved wear.
- Stainless steel, teflon, and hard coated nickel components ensure long lasting performance, even with abrasive materials.
- Stroke adjust to preset shot size.
- Manual ("eyeball") or controlled dispensing.
- Mixer manifold isolates materials until they enter the disposable mixer.
- Inexpensive disposable mixing. No solvents.
- Material is pressure fed from tanks or pump fed from 5 gallon pails, 55 gallon drums, or other bulk containers.
- Encoder - For critical applications requiring precise shot size.
- Accuracy to .0008" of cylinder stroke. (.0004" optional)
- Pumps - Wide range available for use with 5 gallon to 55 gallon containers.
- Air assisted ram for heavy or viscous liquids.
- Tanks - Vacuum degassing -- 1 Quart to 30 gallons
- Heated hoses - Up to 20 feet.
-- Heated blankets to 200°F
-- Agitation-pneumatic or electric
-- Nitrogen blanket for moisture sensitive materials
-- Level controls
- Systems Integration - Interfacing of Sheepscot dispensing equipment with your process.
- Portable skids/carts - Engineered to your application, offers mobility for remote task requirements.
