Print This Page

Enlarge Picture

Model JV150B Toroidal Winding Machine with 2-Preset Counter

Specification / Capabilities Maximum wire size #30awg (0.25mm) Minimum wire size #42awg (0.06mm) Maximum coil OD 0.312" (8.0mm) Minimum coil OD 0.100" (2.5mm) Minimum coil ID 0.040" (1.0mm) Maximum coil HT 0.150" (3.8mm) Winding speeds Variable to 85 tpm Wire spacing Automatic variable (360° maximum) Maximum wire length 9.0" (23.0mm) Core rotation 0° to 360° (one layer winding only) Motor Fractional DC Power requirement 110-120V, 50-60 cycles (220V optional) Crated dimensions 37" x 37" x 42" (94 x 94 107cm) Crated weight 100 lbs (46 kg)

Principal and Optional Features Automatic pull type winder for miniature coil Multi-cores-per-minute capability Absolutely simple to run (operator can be trained in minutes) 9" maximum wire capacity (23.0 cm) Maximum of one layer winding on core Multi-layer windings not possible No pre-cutting / pre-loading of shuttles because there are no shuttles used Available with automatic tap puller (one tap per coil) Will wind single, bifilar or trifilar winding Adjustable, automatic core rotation for controlled wire spacing Dual preset electronic turns counter Push button controls / operator safety guard Handweel for manual operation Micrometer "x" and "y" axis adjustments for centering core with needle

|