7"Gear Head
Enlarge Picture
Maximum coil OD: 4.000" (101.6mm)
Minimum coil OD: 1.000" (25.4mm)
Minimum coil ID: 0.500" (12.7mm)
Maximum coil HT: 2.000" (50.8mm)
Wire size: #16-#34 awg (1.40 - 0.16mm)
|
7"Tape Head
Enlarge Picture
Maximum coil OD: 4.000" (101.6mm)
Minimum coil OD: 0.750" (19.0mm)
Minimum coil ID: 0.625" (16.0mm)
Maximum coil HT: 2.000" (50.8mm)
Minimum Tape Width: 1/4" (6mm)
Maximum Tape Width: 3/8" (10mm)
|
7" Tape Head Features
- Interchangeable magazines with removable sector to accommodate tape widths of 1/4"(6mm) 5/16"(8mm) and 3/8"(10mm)
- No need to change magazine drive pulleys when changing from one size magazine to another
- Counter controls measure of tape supply to magazine and number of wraps on core
- Automatic tap cut-off from spool supply
- Dereeler handles up to 12" diameter tape spools
- Core rotation speed control allows tape overlap on core to be adjusted while taping
- Footswitch controlled
- Will tape all non-adhesive materials (mylar, glass, copper shielding,etc.)
|
