Print This Page

Jovil/Universal Manufacturing Co.



Enlarge Picture

Model SMC-4
Microprocessor Controlled
Toroidal Winding Machine
with RS-232 for Downloading from PC

Full programmability of all winding functions now available in a heavy duty floor stand machine. Forget about lengthy set-up times. The famous SMC control now allows all winding functions to be programmed for ease of repeatable recall at any time. The SMC-4 is a heavy sized floor stand machine for the winding of large size toroidal coils and is unmatched by any competitor for general winding and taping applications. The ability to accept 4 types of winding heads along with 3 sizes of taping heads makes this machine the most versatile in its class. Core sizes from 3.5 inch (89.0mm) to 46.0 inch (1169 mm). Wire sizes from #38 awg (0.1mm) to #4 awg (5.4 mm).


Specification / Capabilities


Maximum wire size #4 awg (5.4 mm)
Minimum wire size #38 awg (0.1 mm)
Maximum coil O.D. 46.0" (1169 mm)
Minimum coil O.D. 3.5" (89 mm)
Minimum coil I.D. 0.5" (12.7 mm)
Maximum coil height 12.0" (305 mm)
Maximum Coil weight 500 lbd (227 kg)
Winding speeds Variable depending on head
Wire spacing Programmable variable
Segment Winding Programmable
Progressive Winding Programmable with controller
Deceleration Control Programmable with controller
Acceleration Control Programmable with controller
Shuttle Head Motor 3 HP DC
Core Rotation Motor Servo motor
Power requirement 220 volt AC single phase,(50-60 cycles)
Crated dimensions 48" x 60" x 84" (121.4 x 153 x 213 cm)
Crated weight 1095 lbs (497 kg)

Principal and Optional Features

  • Separate speed controls for loading and winding
  • Programmable servo motor driven core rotation in either direction with minimum backlash
  • Programmable wire spacing, from coarse to fine micro-step resolution
  • Electronic linear pick-up for loading (feet or meters)
  • Tape head controls
  • Solid-state microprocessor count controller with a total of 99 programmable presets/LED readout/built-in fiber optic turns sensor/program storage/production batch counter and the utmost accuracy, stability and reliability
  • RS-232 with interface software
  • Quick change winding and taping heads
  • Automatic core index function
  • Push button, on-off footswitch or variable speed footpedal operation
  • Optional SMC programming software to pre-calculate and download all winding parameters from your PC to the machine



This free script provided by JavaScript Kit






Add the MTS (Mobile Taping Station) to your SMC-4 Machine.



See the rest of the SMC line-up:   SMC-1   SMC-2   SMC-3       See also the optional Software for this machine.



|